only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 1 05323 csp040605c 200w c hi p sc ale tv s a rr ay de scr i p tion the csp040605c is a chip scale tvs array that employ advanced silicon p/n juncton technology for unmatched board-level transient voltage protecton against elec - trostatc discharge (esd) and electrical fast transients (eft). developed specifcally for high-density circuit protecton, this series meets the iec 61000-4-2 and 61000- 4-4 requirements. these devices are ideally suited for handheld devices such as smart phones, pcmcia and smart cards. this device provides esd protecton greater than 25 kilovolts with a peak pulse power dissipaton of 200 wats per line for an 8/20s waveform. in additon, the csp040605c features superior clamping performance, low leakage current characteristcs and a response tme of less than a nanosecond. their low inductance virtu - ally eliminates overshoot voltage due to package inductance. featu r e s ? compatble with iec 61000-4-2 (esd): air 15kv, contact 8kv ? compatble with iec 61000-4-4 (eft): 40a, 5/50ns ? esd protecton > 25 kilovolts ? available in 5 volts ? 200 wats peak pulse power per line (tp = 8/20s) ? low clamping voltage ? bidirectonal confguraton & monolithic structure ? low leakage current ? low capacitance ? protecton for 3 to 5 lines ? package design prevents solder leakage & solder shorts ? rohs compliant ? reach compliant me c hani c al c ha r a c te r i s ti cs ? molded chip scale 0406 package ? low profle - 0.254mm maximum height ? approximate weight: 0.73 milligrams ? lead-free platng ? solder refow temperature: ? lead-free - sn/ag/cu, 96/3.5/0.5: 260-270c ? flammability ratng ul 94v-0 ? no under-fill required ? 8mm tape per eia standard 481 a pp li c ation s ? smart phones ? portable electronics ? smart cards p in c on f i g u r ation
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 2 05323 csp040605c ty p i c al d evi c e c ha r a c te r i s ti cs m a x i m u m r atin gs @ 25c unless o therwise specifed p a r a m ete r s y mb ol value unit s peak pulse power (tp = 8/20s) - see figure 1 p pp 200 wats operatng temperature t a -55 to 150 c storage temperature t stg -55 to 150 c ele c t r i c al c ha r a c te r i s ti cs p e r line @ 25c unless o therwise specifed p a r t nu mb e r (n ote 1) r ate d s tan d- o ff volta g e v w m volt s m ini m u m br ea kd own volta g e @ 1 m a v (br) volt s m a x i m u m c la mp in g volta g e (fig. 2) @ i p = 1 a v c volt s m a x i m u m c la mp in g volta g e (fig. 2) @ 8/20 s v c @ i pp m a x i m u m lea k a g e c u rr ent (n ote 2) @ v w m i d a ty p i c al c a p a c itan c e @0 v , 1m h z c p f csp040605c 5.9 6.0 11.0 13.0v @ 15.0a 10 35 note s 1. device is bidirectonal. electrical characteristcs apply in both directons. 2. maximum leakage current < 500na @ 3.3v.
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 3 05323 csp040605c ty p i c al d evi c e c ha r a c te r i s ti cs f i g u r e 1 p ea k p ul s e p owe r v s p ul s e ti m e t d - pulse duraton - s 200w, 8/20s waveform 0.1 1 10 100 1,000 10,000 p pp - peak pulse power - w ats 10 100 1,000 10,000 peak pulse power 8/20s average power f i g u r e 3 p owe r d e r atin g c u r ve t a - a mbient t emperature - c 0 25 50 75 100 125 150 0 20 40 60 80 100 % o f rated power test waveform parameters t f = 8s t d = 20s t f e -t peak value i pp t d = t/(i pp /2) f i g u r e 2 p ul s e wave f o rm t - time - s 0 5 10 15 20 25 30 i pp - peak pulse current - % of i pp 0 20 40 60 80 100 120
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 4 05323 csp040605c ty p i c al d evi c e c ha r a c te r i s ti cs f i g u r e 4 ove rs hoot & c la mp in g volta g e e sd t est pulse - 25 kilovolt, 1/30ns ( w aveshape) 5 v olts per division -5 5 15 25 35 f i g u r e 5 ty p i c al c la mp in g volta g e v s p ea k p ul s e c u rr ent i pp - peak pulse current - a mps 0 5 10 15 20 0 4 8 12 v c - clamping v oltage - v olts
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 5 05323 csp040605c s ol d e r r e f low in f o rm ation pr inte d c i rc uit b oa rd r e c o mm en d ation s p a r a m ete r value pad size on pcb 0.275mm pad shape round pad defniton non-solder mask defned pads solder mask opening 0.325mm round solder stencil thickness 0.150mm solder stencil aperture opening (laser cut, 5% tapered walls) 0.330mm round solder paste type no clean pad protectve finish osp (entek cu plus 106a) tolerance - edge to corner ball 50m solder ball side coplanarity 20m maximum dwell time above liquidous (183c) 60 seconds soldering maximum temperature 270c t p 30-60 seconds ramp-up 15 seconds (minimize) solder- time 15-20 seconds ramp-down ramp-down solder melt (maximum t emp) maximum solder refow (35-53c a bove maximum solder melt t emp) ramp-up preheat (stay below flux a ctvaton t emp) t emperature - c r e c o mm en d e d non- s ol d e r m a sk d e f ine d p a d illu s t r ation n on-solder mask defned pad 0.275mm dia . solder mask opening 0.325mm dia . solder stencil opening 0.330mm dia . requi r e m ent s temperature: t p for lead-free (sn/ag/cu): 260-270c t p for tin-lead: 240-245c preheat tme and temperature depends on solder paste and fux actva - ton temperature, component size, weight, surface area and platng.
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 6 05323 csp040605c m ol d e d c hi p sc ale 0406 p a ck a g e in f o rm ation outline d i m en s ion s d i m m illi m ete rs in c he s m in m a x m in m a x a 1.47 1.57 0.058 0.062 b 0.97 1.07 0.038 0.042 c 0.102 0.152 0.004 0.006 d 0.230 0.279 0.009 0.011 e 0.457 0.558 0.018 0.022 f 0.230 0.279 0.009 0.011 g 0.457 0.558 0.018 0.022 h 0.051 0.002 i 0.076 0.101 0.003 .004 j 0.177 0.203 0.007 0.008 n ote s 1. controlling dimensions in inches. c a t op side j h g f d e i a die solder bumps b e c d solder print 0.014 [0.36] dia. p a d layout d i m en s ion s d i m m illi m ete rs in c he s m in m a x m in m a x a 1.63 1.73 0.064 0.068 b 0.20 0.30 0.008 0.012 c 0.46 0.56 0.018 0.022 d 1.16 1.22 0.046 0.048 e 0.46 0.56 0.018 0.022 g 0.25 0.35 0.010 0.014 note s 1. controlling dimension: inches.
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 7 05323 csp040605c ta p e an d r eel in f o rm ation o rd e r in g in f o rm ation b a s e p a r t nu mb e r lea dfr ee s u ff i x ta p e s u ff i x qty /r eel r eel s i z e tu b e qty csp040605c n/a -t75 5,000 7 n/a this device is only available in a lead-free confguraton. sp e c i f i c ation s reel dia. t a p e w i d th a 0 b0 k0 d e f w p0 p2 p t max 178(7) 8mm 1.40 0.10 1.80 0.10 0.32 0.05 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.20 4.00 0.12 2.00 0.05 2.00 0.10 0.25 n ote s 1. dimensions in millimeters. 2. top view of tape. solder bumps are face down in tape package. 3. orientaton: preferred stencil - 0.1mm (0.004). 4. surface mount product is taped and reeled in accordance with eia 481. 5. 8mm plastc tape: 7 reels - 5,000. 6. marking on reel: part number, date code, quanity and lot number. ta p e & r eel o r ientation package outline, pad layout and tape specifcatons per document number 06097.r0 3/11. 10 pitches cumulatve tolerance on tape 0.2 w f b0 e p2 p0 d p a0 k0 t user directon of feed top cover tape triple die - 0406
only one name means protektion? www.protekdevices.com 05323.r1 4/11 page 8 05323 csp040605c c o mp any in f o rm ation c omp any pr ofile protek devices, based in tempe, arizona usa, is a manufacturer of transient voltage suppression (tvs) products designed specifcally for the protecton of electronic systems from the efects of lightning, electrostatc discharge (esd), nuclear electromagnetc pulse (nemp), in - ductve switching and emi/rfi. with over 25 years of engineering and manufacturing experience, protek designs tvs devices that provide applicaton specifc protecton solutons for all electronic equipment/systems. protek devices analog products division, also manufactures analog interface, control, rf and power management products. copyright ? protek devices 2009 - this literature is subject to all applicable copyright laws and is not for resale in any manner. specifications: protek reserves the right to change the electrical and or mechanical characteristcs described herein without notce. design changes: protek reserves the right to discontnue product lines without notce and that the fnal judgement concerning selecton and specifcatons is the buyers and that in furnishing engineering and technical assistance. protek assumes no responsibility with respect to the selecton or specifcatons of such products. protek makes no warranty, representaton or guarantee regarding the suitability of its products for any partcular purpose, nor does protek assume any liability arising out of the applicaton or use of any product or circuit and specifcally disclaims any and all liability without limitaton special, consequental or incidental damages. life support policy: protek devices products are not authorized for use in life support systems without writen consent from the factory. c onta c t us corporate h eadquarters 2929 south fair lane tempe, arizona 85282 usa by t elephone general: 602-431-8101 sales: 602-414-5109 customer service: 602-414-5114 by fax general: 602-431-2288 by e -mail: sales: sales@protekdevices.com customer service: service@protekdevices.com technical support: support@protekdevices.com w eb www.protekdevices.com www.protekanalog.com
|
